Skip to content

1986 Seat Malaga tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Seat Malaga.

1986 Seat Malaga tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1986

Open a trim for its factory package and every alternative size, front and rear.

Seat Malaga 023A

1985 – 1993 Europe market 3 trims

Malaga 1.2

59 hp · 021A1 I4 155/80 R13 79T 2 fitments
Generation023A 1985–1993
Power59 hp
Engine021A1 I4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R13 79T13x5 ET45 4x981.9TiresRims
165/65 R14 79T14x5.5 ET45 4x981.9TiresRims

Malaga 1.5

84 hp · 021A2 I4 165/65 R14 79T 2 fitments
Generation023A 1985–1993
Power84 hp
Engine021A2 I4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79T14x5.5 ET45 4x981.9TiresRims
175/55 R15 81T15x6 ET42 4x982TiresRims

Malaga 1.7D

54 hp · 022A5 I4 165/65 R14 79T 2 fitments
Generation023A 1985–1993
Power54 hp
Engine022A5 I4, Diesel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79T14x5.5 ET45 4x981.9TiresRims
165/60 R15 79T15x5.5 ET45 4x981.9TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.