1991 Seat Marbella tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Seat Marbella.

1991 Seat Marbella tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1986 – 1998 Europe market 2 trims

34 hp · 08NCA I4 135/80 R13 70S 5 fitments

Generation028A 1986–1998

Power34 hp

Engine08NCA I4, Petrol

Center bore58.1 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135/80 R13 70S	13x4 ET41 ~~4x98~~	2	Tires Rims
155/70 R13 73S	13x4 ET40 ~~4x98~~	2	Tires Rims
155/65 R13 70S	13x4 ET40 ~~4x98~~	2	Tires Rims
155/65 R14 73S	14x4 ET40 ~~4x98~~	2	Tires Rims
165/60 R14 70S	14x4 ET40 ~~4x98~~	2	Tires Rims

39 hp · 09NCA 100GL7000 I4 135/80 R13 70S 5 fitments

Generation028A 1986–1998

Power39 hp

Engine09NCA 100GL7000 I4, Petrol

Center bore58.1 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135/80 R13 70S	13x4 ET41 ~~4x98~~	2	Tires Rims
155/70 R13 73S	13x4 ET40 ~~4x98~~	2	Tires Rims
155/65 R13 70S	13x4 ET40 ~~4x98~~	2	Tires Rims
155/65 R14 73S	14x4 ET40 ~~4x98~~	2	Tires Rims
165/60 R14 70S	14x4.5 ET40 ~~4x98~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.