Skip to content

1972 Skoda 100 Series tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1972 Skoda 100 Series.

1972 Skoda 100 Series tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1972

Open a trim for its factory package and every alternative size, front and rear.

Skoda 100 Series Type 100/110

1969 – 1976 Europe market 3 trims

100 Series 1.0

39 hp · I4 155/80 R14 76S 4 fitments
GenerationType 100/110 1969–1976
Power39 hp
EngineI4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R14 76S14x4 ET38 4x13022TiresRims
165/75 R14 76S14x4.5 ET35 4x13022TiresRims
175/65 R15 76S15x5 ET33 4x13022TiresRims
185/60 R15 76S15x5.5 ET31 4x13022TiresRims

100 Series 1.1

44 hp · I4 155/80 R14 76S 4 fitments
GenerationType 100/110 1969–1976
Power44 hp
EngineI4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R14 76S14x4 ET38 4x13022TiresRims
165/75 R14 76S14x4.5 ET35 4x13022TiresRims
175/65 R15 76S15x5 ET33 4x13022TiresRims
185/60 R15 76S15x5.5 ET31 4x13022TiresRims

100 Series 1.1 LS

51 hp · I4 155/80 R14 76S 4 fitments
GenerationType 100/110 1969–1976
Power51 hp
EngineI4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R14 76S14x4 ET38 4x13022TiresRims
165/75 R14 76S14x4.5 ET35 4x13022TiresRims
175/65 R15 76S15x5 ET33 4x13022TiresRims
185/60 R15 76S15x5.5 ET31 4x13022TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.