Skip to content

1978 Skoda 100 Series tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1978 Skoda 100 Series.

1978 Skoda 100 Series tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1978

Open a trim for its factory package and every alternative size, front and rear.

Skoda 100 Series Type 105/120

1977 – 1990 Europe market 3 trims

100 Series 1.0

44 hp · I4 165/80 R13 83S 4 fitments
GenerationType 105/120 1977–1990
Power44 hp
EngineI4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/80 R13 83S13x4.5 ET38 4x13023TiresRims
165/70 R14 83S14x4.5 ET38 4x13023TiresRims
175/70 R14 83S14x5 ET35 4x13023TiresRims
185/65 R14 83S14x5.5 ET35 4x13026TiresRims

100 Series 1.2

50 hp · I4 165/80 R13 83S 4 fitments
GenerationType 105/120 1977–1990
Power50 hp
EngineI4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/80 R13 83S13x4.5 ET38 4x13023TiresRims
165/70 R14 83S14x4.5 ET38 4x13023TiresRims
175/70 R14 83S14x5 ET35 4x13023TiresRims
185/65 R14 83S14x5.5 ET35 4x13026TiresRims

100 Series 1.2 LS

55 hp · I4 165/80 R13 83S 4 fitments
GenerationType 105/120 1977–1990
Power55 hp
EngineI4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/80 R13 83S13x4.5 ET38 4x13023TiresRims
165/70 R14 83S14x4.5 ET38 4x13023TiresRims
175/70 R14 83S14x5 ET35 4x13023TiresRims
185/65 R14 83S14x5.5 ET35 4x13026TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.