Skip to content

2000 Skoda Felicia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Skoda Felicia.

Bolt pattern
Fitment tables

4 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Skoda Felicia Type 791

1994 – 2001 Europe market 4 trims

Felicia 1.6MPI

74 hp · 1.6L I4 175/60 R14 79T 3 fitments
GenerationType 791 1994–2001
Power74 hp
Engine1.6L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R14 79T14x5 ET38 4x10029TiresRims
195/50 R15 79H15x6 ET38 4x10030TiresRims
195/45 R16 77V16x6.5 ET35 4x10030TiresRims

Felicia 1.9D

63 hp · 1.9L I4 165/70 R13 79T 3 fitments
GenerationType 791 1994–2001
Power63 hp
Engine1.9L I4, Diesel
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R13 79T13x4.5 ET38 4x10029TiresRims
175/60 R14 79T14x5 ET38 4x10030TiresRims
185/55 R15 79T15x6 ET38 4x10030TiresRims

Felicia 135i

54 hp · 1.3L I4 165/70 R13 79T 3 fitments
GenerationType 791 1994–2001
Power54 hp
Engine1.3L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R13 79T13x4.5 ET38 4x1001.8TiresRims
175/60 R14 79T14x5 ET40 4x10029TiresRims
175/55 R15 77T15x5.5 ET38 4x10030TiresRims

Felicia 136i

67 hp · 1.3L I4 165/70 R13 79T 3 fitments
GenerationType 791 1994–2001
Power67 hp
Engine1.3L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R13 79T13x4.5 ET38 4x1001.8TiresRims
175/60 R14 79T14x5.5 ET40 4x10029TiresRims
195/50 R15 77T15x6 ET38 4x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.