Skip to content

1959 Skoda Octavia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1959 Skoda Octavia.

1959 Skoda Octavia tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1959

Open a trim for its factory package and every alternative size, front and rear.

Skoda Octavia Typ 985

1959 – 1971 Europe market 2 trims

Octavia 1.1

42 hp · 1.1L I4 165/80 R14 2 fitments
GenerationTyp 985 1959–1971
Power42 hp
Engine1.1L I4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/80 R1414x4.5 ET35 4x130–TiresRims
185/70 R1414x5 ET38 4x130–TiresRims

Octavia 1.2

50 hp · 1.2L I4 165/80 R14 2 fitments
GenerationTyp 985 1959–1971
Power50 hp
Engine1.2L I4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/80 R1414x4.5 ET35 4x130–TiresRims
185/70 R1414x5 ET38 4x130–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.