2025 Soueast S06 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Soueast S06.

2025 Soueast S06 tire sizes

Bolt pattern

Other years

2024 2025 All 2024–2025

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2024 – 2027 2 trims

154 hp · 1.5 L SQRE4T15C I4 Petrol 1.5 L SQRE4T15C I4 235/60 R18 4 fitments

GenerationS06 2024–2027

MarketChina

Power154 hp

Engine1.5 L SQRE4T15C I4 Petrol 1.5 L SQRE4T15C I4, Petrol

Center bore60.1 mm

PCD5x108

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	235/60 R18	18x7 ET38 ~~5x108~~	33	Tires Rims
Alt	235/65 R17	17x7 ET38 ~~5x108~~	33	Tires Rims
Alt	235/55 R19	19x7.5 ET38 ~~5x108~~	33	Tires Rims
Alt	255/45 R20	20x8.5 ET38 ~~5x108~~	33	Tires Rims

184 hp · 1.6 L SQRF4J16 I4 Petrol 1.6 L SQRF4J16 I4 235/55 R19 4 fitments

GenerationS06 2024–2027

Power184 hp

Engine1.6 L SQRF4J16 I4 Petrol 1.6 L SQRF4J16 I4, Petrol

Center bore60.1 mm

PCD5x108

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	235/55 R19	19x7.5 ET38 ~~5x108~~	33	Tires Rims
Alt	235/60 R18	18x7 ET38 ~~5x108~~	33	Tires Rims
Alt	255/50 R19	19x8 ET38 ~~5x108~~	33	Tires Rims
Alt	255/45 R20	20x8.5 ET38 ~~5x108~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.