Skip to content

2025 Soueast S07 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Soueast S07.

2025 Soueast S07 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Soueast S07 S07

2024 – 2027 2 trims

S07 1.5T

154 hp · 1.5 L SQRE4T15C I4 Petrol 1.5 L SQRE4T15C I4 255/45 R20 3 fitments
GenerationS07 2024–2027
MarketMexico
Power154 hp
Engine1.5 L SQRE4T15C I4 Petrol 1.5 L SQRE4T15C I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE255/45 R2020x8.5 ET43 5x10833TiresRims
Alt235/60 R1818x7 ET38 5x10833TiresRims
Alt235/55 R1919x7.5 ET38 5x10833TiresRims

S07 1.6T

188 hp · 1.6 L SQRF4J16 I4 Petrol 1.6 L SQRF4J16 I4 235/60 R18 3 fitments
GenerationS07 2024–2027
Power188 hp
Engine1.6 L SQRF4J16 I4 Petrol 1.6 L SQRF4J16 I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/60 R1818x7 ET38 5x10833TiresRims
Alt235/55 R1919x7.5 ET38 5x10833TiresRims
Alt255/45 R2020x8.5 ET43 5x10833TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.