1992 Subaru Domingo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Subaru Domingo.

1992 Subaru Domingo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1983 – 1994 Japan market 2 trims

47 hp · I3 155/80 R12 80N 4 fitments

GenerationKJ 1983–1994

Power47 hp

EngineI3, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/80 R12 80N	12x4 ET28 ~~4x100~~	29	Tires Rims
165/70 R13 79N	13x4.5 ET28 ~~4x100~~	30	Tires Rims
175/65 R13 79N	13x5 ET30 ~~4x100~~	30	Tires Rims
175/60 R14 78Q	14x5 ET30 ~~4x100~~	33	Tires Rims

51 hp · I3 155/80 R12 80N 4 fitments

GenerationKJ 1983–1994

Power51 hp

EngineI3, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/80 R12 80N	12x4 ET28 ~~4x100~~	29	Tires Rims
165/70 R13 79N	13x4.5 ET28 ~~4x100~~	29	Tires Rims
175/65 R13 79N	13x5 ET30 ~~4x100~~	30	Tires Rims
175/65 R14 78Q	14x5 ET30 ~~4x100~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.