Skip to content

2003 Subaru Justy tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Subaru Justy.

Bolt patterns

2 generations were sold in 2003. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Subaru Justy HT

2003 – 2007 Europe market 2 trims

Justy 1.3i

87 hp · I4 165/70 R14 79S 4 fitments
GenerationHT 2003–2007
Power87 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R14 79S14x4.5 ET45 4x10026TiresRims
175/65 R14 81S14x5 ET45 4x10029TiresRims
175/60 R15 79S15x5.5 ET42 4x10029TiresRims
185/55 R15 81H15x6 ET38 4x10030TiresRims

Justy 1.5i

109 hp · I4 175/65 R14 81T 4 fitments
GenerationHT 2003–2007
Power109 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 81T14x5 ET45 4x10029TiresRims
185/60 R14 81T14x5.5 ET45 4x10029TiresRims
185/55 R15 81T15x5.5 ET42 4x10030TiresRims
185/50 R16 79H16x6 ET38 4x10032TiresRims

Subaru Justy SF

1995 – 2003 Europe market 1 trim

Justy 1.3i

84 hp · 1.3L I4 165/70 R13 75S 3 fitments
GenerationSF 1995–2003
Power84 hp
Engine1.3L I4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R13 75S13x4.5 ET45 4x114.326TiresRims
165/60 R14 75S14x4.5 ET45 4x114.326TiresRims
165/55 R15 75H15x5 ET45 4x114.329TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.