Skip to content

2011 Subaru Legacy B4 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Subaru Legacy B4.

Bolt pattern
Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Subaru Legacy B4 BM

2009 – 2014 Japan market 4 trims

Legacy B4 2.5GT (DBA-BM9)

282 hp · H4 225/50 R17 93V 3 fitments
GenerationBM 2009–2014
Power282 hp
EngineH4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R17 93V17x7.5 ET55 5x10033TiresRims
225/45 ZR18 92W18x7.5 ET55 5x10033TiresRims
245/35 ZR19 91W19x8 ET48 5x10036TiresRims

Legacy B4 2.5GT S (DBA-BM9)

282 hp · H4 225/45 ZR18 93W 3 fitments
GenerationBM 2009–2014
Power282 hp
EngineH4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/45 ZR18 93W18x7.5 ET55 5x10033TiresRims
245/40 ZR18 93W18x8 ET52 5x10033TiresRims
245/35 ZR19 91Y19x8.5 ET48 5x10036TiresRims

Legacy B4 2.5i (DBA-BM9)

168 hp · H4 205/60 R16 92H 3 fitments
GenerationBM 2009–2014
Power168 hp
EngineH4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R16 92H16x6.5 ET48 5x10030TiresRims
215/50 R17 92V17x7 ET55 5x10033TiresRims
225/45 ZR18 92W18x7.5 ET52 5x10033TiresRims

Legacy B4 2.5i S (DBA-BM9)

168 hp · H4 215/50 R17 93V 3 fitments
GenerationBM 2009–2014
Power168 hp
EngineH4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/50 R17 93V17x7 ET55 5x10033TiresRims
225/45 R18 92V18x7.5 ET55 5x10033TiresRims
225/40 ZR19 91W19x7.5 ET52 5x10033TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.