1973 Subaru Leone tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1973 Subaru Leone.

1973 Subaru Leone tire sizes

165/70RS14 175/65RS14

Bolt pattern

4x140

Other years

1971 1972 1973 1974 1975 1976 1977 1978 All 1971–1994

Fitment tables

4 trims sold in 1973

Open a trim for its factory package and every alternative size, front and rear.

Subaru Leone I

1971 – 1981 Japan market 4 trims

Leone 1.1

60 hp · H4 155x SR13 2 fitments

GenerationI 1971–1981

Power60 hp

EngineH4, Petrol

Center bore101.6 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET42 ~~4x140~~	–	Tires Rims
165/70 SR14	14x4.5 ET42 ~~4x140~~	–	Tires Rims

Leone 1.2

67 hp · H4 155x SR13 2 fitments

GenerationI 1971–1981

Power67 hp

EngineH4, Petrol

Center bore101.6 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET42 ~~4x140~~	–	Tires Rims
165/70 SR14	14x4.5 ET42 ~~4x140~~	–	Tires Rims

Leone 1.4

71 hp · H4 155x SR13 2 fitments

GenerationI 1971–1981

Power71 hp

EngineH4, Petrol

Center bore101.6 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET42 ~~4x140~~	–	Tires Rims
175/65 SR14	14x5 ET42 ~~4x140~~	–	Tires Rims

Leone 1.6

80 hp · H4 155x SR13 2 fitments

GenerationI 1971–1981

Power80 hp

EngineH4, Petrol

Center bore101.6 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET42 ~~4x140~~	–	Tires Rims
175/65 SR14	14x5 ET42 ~~4x140~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.