1982 Subaru Leone tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1982 Subaru Leone.

1982 Subaru Leone tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1979 – 1984 Japan market 3 trims

80 hp · H4 155x SR13 2 fitments

GenerationII 1979–1984

Power80 hp

EngineH4, Petrol

Center bore101.6 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET45 ~~4x140~~	–	Tires Rims
175/70 HR13	13x5 ET45 ~~4x140~~	–	Tires Rims

72 hp · H4 155x SR13 2 fitments

GenerationII 1979–1984

Power72 hp

EngineH4, Petrol

Center bore101.6 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET45 ~~4x140~~	–	Tires Rims
175/70 HR13	13x5 ET45 ~~4x140~~	–	Tires Rims

95 hp · H4 175/70 HR13 2 fitments

GenerationII 1979–1984

Power95 hp

EngineH4, Petrol

Center bore101.6 mm

PCD4x140

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 HR13	13x5 ET45 ~~4x140~~	–	Tires Rims
185/60 VR14	14x5.5 ET45 ~~4x140~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.