Skip to content

1988 Subaru Leone tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Subaru Leone.

Bolt pattern
Fitment tables

5 trims sold in 1988

Open a trim for its factory package and every alternative size, front and rear.

Subaru Leone III

1984 – 1994 Japan market 5 trims

Leone 1.3 (AA)

64 hp · H4 155x SR13 3 fitments
GenerationIII 1984–1994
Power64 hp
EngineH4, Petrol
Center bore101.6 mm
PCD4x140
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x4.5 ET38 4x140–TiresRims
175/70 SR1313x5 ET38 4x140–TiresRims
175/65 HR1414x5.5 ET40 4x140–TiresRims

Leone 1.6 (E-AA2)

75 hp · H4 155x SR13 3 fitments
GenerationIII 1984–1994
Power75 hp
EngineH4, Petrol
Center bore101.6 mm
PCD4x140
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x4.5 ET38 4x140–TiresRims
175/70 SR1313x5 ET38 4x140–TiresRims
185/60 HR1414x5.5 ET40 4x140–TiresRims

Leone 1.6 (E-AA3)

75 hp · H4 155x SR13 3 fitments
GenerationIII 1984–1994
Power75 hp
EngineH4, Petrol
Center bore101.6 mm
PCD4x140
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x4.5 ET38 4x140–TiresRims
175/70 SR1313x5 ET38 4x140–TiresRims
185/60 HR1414x6 ET38 4x140–TiresRims

Leone 1.8 (AA)

90 hp · H4 175/70 SR13 3 fitments
GenerationIII 1984–1994
Power90 hp
EngineH4, Petrol
Center bore101.6 mm
PCD4x140
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1313x5 ET38 4x140–TiresRims
185/60 HR1414x5.5 ET42 4x140–TiresRims
185/55 HR1515x6 ET38 4x140–TiresRims

Leone 1.8T (AA)

114 hp · H4 185/60 HR14 3 fitments
GenerationIII 1984–1994
Power114 hp
EngineH4, Petrol
Center bore101.6 mm
PCD4x140
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 HR1414x5.5 ET45 4x140–TiresRims
195/50 VR1515x6 ET42 4x140–TiresRims
195/45 VR1616x6.5 ET38 4x140–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.