Skip to content

1995 Subaru Sambar Dias tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Subaru Sambar Dias.

1995 Subaru Sambar Dias tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1995

Open a trim for its factory package and every alternative size, front and rear.

Subaru Sambar Dias KV

1992 – 1999 Japan market 4 trims

Sambar Dias 660i (V-KV3)

39 hp · I4 145x R12 81N 4 fitments
GenerationKV 1992–1999
Power39 hp
EngineI4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x R12 81N12x4 ET45 4x10026TiresRims
155/80 R12 79N12x4 ET45 4x10029TiresRims
155/70 R13 78N13x4.5 ET45 4x10029TiresRims
165/60 R14 77Q14x5 ET45 4x10029TiresRims

Sambar Dias 660i (V-KV4)

39 hp · I4 145x R12 80N 4 fitments
GenerationKV 1992–1999
Power39 hp
EngineI4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x R12 80N12x4 ET45 4x10026TiresRims
155/80 R12 80N12x4 ET45 4x10029TiresRims
155/70 R13 79N13x4.5 ET45 4x10029TiresRims
165/60 R14 77Q14x5 ET45 4x10029TiresRims

Sambar Dias 660T (V-KV3)

54 hp · I4 155x R12 81N 4 fitments
GenerationKV 1992–1999
Power54 hp
EngineI4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155x R12 81N12x4 ET45 4x10026TiresRims
155/70 R13 79N13x4.5 ET45 4x10029TiresRims
165/60 R14 78N14x4.5 ET45 4x10029TiresRims
175/50 R15 77S15x5 ET40 4x10032TiresRims

Sambar Dias 660T (V-KV4)

54 hp · I4 155x R12 81N 4 fitments
GenerationKV 1992–1999
Power54 hp
EngineI4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155x R12 81N12x4 ET45 4x10026TiresRims
155/70 R13 79N13x4.5 ET45 4x10029TiresRims
165/60 R14 78N14x4.5 ET45 4x10029TiresRims
175/50 R15 77Q15x5 ET40 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.