Skip to content
tirewheelguide.com

1989 Subaru Sambar Try tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 Subaru Sambar Try.

1989 Subaru Sambar Try tire sizes

155/80R12155/70R13165/60R14
Bolt pattern
Other years
19891990199119921993 All 1989–1993
Fitment tables

3 trims sold in 1989

Open a trim for its factory package and every alternative size, front and rear.

Subaru Sambar Try KR

1989 – 1990 Japan market 3 trims

Sambar Try 550 (M-KR1)

28 hp · I4 145x R12 80N 3 fitments
GenerationKR 1989–1990
Power28 hp
EngineI4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x R12 80N12x3.5 ET45 4x10026TiresRims
155/80 R12 80N12x4 ET45 4x10026TiresRims
155/70 R13 79N13x4.5 ET45 4x10029TiresRims

Sambar Try 550 (M-KR5)

34 hp · I4 145x R12 80N 4 fitments
GenerationKR 1989–1990
Power34 hp
EngineI4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x R12 80N12x3.5 ET45 4x10026TiresRims
155/80 R12 80N12x4 ET45 4x10026TiresRims
155/70 R13 79N13x4.5 ET45 4x10029TiresRims
165/60 R14 77Q14x5 ET45 4x10029TiresRims

Sambar Try 550 (M-KR6)

34 hp · I4 145x R12 80N 4 fitments
GenerationKR 1989–1990
Power34 hp
EngineI4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x R12 80N12x3.5 ET45 4x10026TiresRims
155/80 R12 80N12x4 ET45 4x10026TiresRims
155/70 R13 79N13x4.5 ET45 4x10029TiresRims
165/60 R14 77Q14x5 ET45 4x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading