Skip to content

2007 Subaru Stella Custom tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Subaru Stella Custom.

2007 Subaru Stella Custom tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Subaru Stella Custom RN

2006 – 2011 Japan market 4 trims

Stella Custom 660i (DBA-RN1)

54 hp · I4 155/65 R14 75Q 3 fitments
GenerationRN 2006–2011
Power54 hp
EngineI4, Petrol
Center bore59 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75Q14x4.5 ET45 4x10033TiresRims
165/60 R14 75Q14x5 ET45 4x10033TiresRims
175/60 R14 75Q14x5 ET45 4x10033TiresRims

Stella Custom 660i (DBA-RN2)

54 hp · I4 155/65 R14 75Q 3 fitments
GenerationRN 2006–2011
Power54 hp
EngineI4, Petrol
Center bore59 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75Q14x4.5 ET45 4x10033TiresRims
165/60 R14 75Q14x5 ET45 4x10033TiresRims
175/60 R14 75Q14x5 ET45 4x10033TiresRims

Stella Custom 660T (ABA-RN1)

63 hp · I4 155/65 R14 75Q 3 fitments
GenerationRN 2006–2011
Power63 hp
EngineI4, Petrol
Center bore59 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75Q14x4.5 ET45 4x10033TiresRims
185/55 R14 75Q14x6 ET42 4x10033TiresRims
195/45 R15 75Q15x6.5 ET38 4x10030TiresRims

Stella Custom 660T (ABA-RN2)

63 hp · I4 155/65 R14 75Q 3 fitments
GenerationRN 2006–2011
Power63 hp
EngineI4, Petrol
Center bore59 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75Q14x4.5 ET45 4x10033TiresRims
185/55 R14 75Q14x6 ET42 4x10033TiresRims
195/45 R15 75Q15x6.5 ET38 4x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.