Skip to content

2005 Suzuki Aerio Sedan tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Suzuki Aerio Sedan.

2005 Suzuki Aerio Sedan tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Suzuki Aerio Sedan RA/RC

2001 – 2007 Japan market 3 trims

Aerio Sedan 1.5i (ABA-RA21S)

109 hp · M15A I4 185/65 R14 86S 4 fitments
GenerationRA/RC 2001–2007
Power109 hp
EngineM15A I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 86S14x5.5 ET45 4x10029TiresRims
195/55 R15 84V15x6 ET45 4x10029TiresRims
195/50 R16 83V16x6 ET45 4x10032TiresRims
205/50 R16 84V16x6.5 ET45 4x10032TiresRims

Aerio Sedan 1.5i (CBA-RA21S)

109 hp · M15A I4 185/65 R14 86S 4 fitments
GenerationRA/RC 2001–2007
Power109 hp
EngineM15A I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 86S14x5.5 ET45 4x10029TiresRims
195/55 R15 84V15x6 ET45 4x10029TiresRims
195/50 R16 83V16x6 ET45 4x10032TiresRims
205/50 R16 84V16x6.5 ET45 4x10032TiresRims

Aerio Sedan 1.8i (ABA-RC51S)

123 hp · M18A I4 195/55 R15 84V 4 fitments
GenerationRA/RC 2001–2007
Power123 hp
EngineM18A I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 84V15x6 ET45 4x10029TiresRims
195/50 R16 83V16x6 ET45 4x10032TiresRims
205/50 R16 84V16x6.5 ET45 4x10032TiresRims
205/40 ZR17 83W17x7 ET42 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.