2015 Suzuki Alto Lapin tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 Suzuki Alto Lapin.

2015 Suzuki Alto Lapin tire sizes

155/65R14 165/55R15 145/80R13

Bolt pattern

4x100

2 generations were sold in 2015. Check your chassis code before ordering wheels.

Other years

2011 2012 2013 2014 2015 2016 2017 2018 All 2002–2020

Fitment tables

3 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Suzuki Alto Lapin III (HE33)

2015 – 2020 Japan market 1 trim

Alto Lapin 660i (DBA-HE33S)

51 hp · 0.66L R06A I3 155/65 R14 75S 4 fitments

GenerationIII (HE33) 2015–2020

Power51 hp

Engine0.66L R06A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R14 75S	14x4.5 ET45 ~~4x100~~	35	Tires Rims
145/80 R13 75S	13x4 ET40 ~~4x100~~	35	Tires Rims
165/55 R15 75V	15x4.5 ET45 ~~4x100~~	35	Tires Rims
165/55 R15 75V	15x5 ET45 ~~4x100~~	35	Tires Rims

Suzuki Alto Lapin II (HE22)

2008 – 2015 Japan market 2 trims

Alto Lapin 660i (DBA-HE22S)

54 hp · K6A I3 155/65 R14 75S 2 fitments

GenerationII (HE22) 2008–2015

Power54 hp

EngineK6A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R14 75S	14x4.5 ET45 ~~4x100~~	29	Tires Rims
165/55 R15 75V	15x4.5 ET45 ~~4x100~~	29	Tires Rims

Alto Lapin 660T (DBA-HE22S)

63 hp · K6A I3 155/65 R14 75S 2 fitments

GenerationII (HE22) 2008–2015

Power63 hp

EngineK6A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R14 75S	14x4.5 ET45 ~~4x100~~	29	Tires Rims
165/55 R15 75V	15x5 ET45 ~~4x100~~	29	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.