Skip to content
tirewheelguide.com

2011 Suzuki Alto tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Suzuki Alto.

2011 Suzuki Alto tire sizes

155/65R14145/80R13155/75R13165/65R14165/60R14165/55R15
Bolt pattern
Other years
20072008200920102011201220132014 All 1988–2026
Fitment tables

3 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Suzuki Alto VII (HA25-35)

2009 – 2014 3 trims

Alto 1.0i

67 hp · K10B I3 155/65 R14 75T 4 fitments
GenerationVII (HA25-35) 2009–2014
MarketEurope
Power67 hp
EngineK10B I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75T14x4.5 ET45 4x1002TiresRims
165/60 R14 75T14x4.5 ET45 4x1002TiresRims
165/55 R15 75T15x4.5 ET45 4x1002TiresRims
165/55 R15 75V15x5 ET45 4x1002TiresRims

Alto 660i (DBA-HA25S)

54 hp · K6A I3 145/80 R13 75S 4 fitments
GenerationVII (HA25-35) 2009–2014
MarketJapan
Power54 hp
EngineK6A I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R13 75S13x4 ET45 4x10026TiresRims
155/75 R13 75S13x4 ET45 4x10026TiresRims
155/65 R14 75T14x4.5 ET45 4x10029TiresRims
165/65 R14 75H14x4.5 ET45 4x10029TiresRims

Alto 660i (HBD-HA25V)

54 hp · K6A I3 145/80 R13 75S 4 fitments
GenerationVII (HA25-35) 2009–2014
MarketJapan
Power54 hp
EngineK6A I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R13 75S13x4 ET45 4x10026TiresRims
155/75 R13 75S13x4 ET45 4x10026TiresRims
155/65 R14 75T14x4.5 ET45 4x10029TiresRims
165/65 R14 75H14x4.5 ET45 4x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading