Skip to content

2011 Suzuki APV tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Suzuki APV.

Bolt pattern
Fitment tables

2 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Suzuki APV II

2010 – 2021 Southeast Asia market 2 trims

APV 1.5i

92 hp · 1.5L G15A I4 185x R14 102R 5 fitments
GenerationII 2010–2021
Power92 hp
Engine1.5L G15A I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185x R14 102R14x5 ET40 5x114.3–TiresRims
195/65 R15 95T15x5.5 ET45 5x114.3–TiresRims
205/60 R15 95T15x6 ET45 5x114.3–TiresRims
205/55 R16 94T16x6.5 ET48 5x114.3–TiresRims
215/50 R17 95H17x7 ET42 5x114.3–TiresRims

APV 1.6i

91 hp · 1.6L G16A I4 185/80 R14 102R 5 fitments
GenerationII 2010–2021
Power91 hp
Engine1.6L G16A I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/80 R14 102R14x5 ET40 5x114.3–TiresRims
195/65 R15 95T15x5.5 ET45 5x114.3–TiresRims
205/60 R15 95T15x6 ET45 5x114.3–TiresRims
205/55 R16 94T16x6.5 ET48 5x114.3–TiresRims
215/50 R17 95H17x7 ET42 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.