1991 Suzuki Carry tire and wheel sizes, bolt pattern and tire pressure
Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Suzuki Carry.
1991 Suzuki Carry tire sizes
Bolt pattern
2 generations were sold in 1991. Check your chassis code before ordering wheels.
Fitment tables
6 trims sold in 1991
Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.
GenerationIX (DC/DD51) 1991–1995
Power42 hp
EngineF6A I3, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.25
GenerationIX (DC/DD51) 1991–1995
Power42 hp
EngineF6A I3, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.25
GenerationIX (DC/DD51) 1991–1995
Power42 hp
EngineF6A I3, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.25
GenerationIX (DC/DD51) 1991–1995
Power42 hp
EngineF6A I3, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.25
Suzuki Carry VIII (DA/DB51)
1990 – 1991 Japan market 2 trims
Carry 660 (DA51T)
42 hp · F6A I3
5.00x D10 5 fitments
GenerationVIII (DA/DB51) 1990–1991
Power42 hp
EngineF6A I3, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM10 x 1.25
Carry 660 (DB51T)
42 hp · F6A I3
5.00x D10 5 fitments
GenerationVIII (DA/DB51) 1990–1991
Power42 hp
EngineF6A I3, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM10 x 1.25
No trims match these filters
Try a trim name or an engine size like 2.0L.
Reading the table
What these columns mean
- OE fitment
- The package fitted at the factory for that trim.
- Alternative
- A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
- Rim size
- Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
- Bolt pattern (PCD)
- Number of studs and the diameter of the circle they sit on. It must match exactly.
- Center bore
- Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
- Pressure
- Recommended cold inflation pressure for that axle, in psi.
- Staggered
- A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
- Thread size
- Lug bolt or nut thread — needed when buying aftermarket fasteners.
Considering a different size?
Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.
Recent articles