2001 Suzuki Carry tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Suzuki Carry.

2001 Suzuki Carry tire sizes

155/70R13

Bolt pattern

4x100

2 generations were sold in 2001. Check your chassis code before ordering wheels.

Other years

1997 1998 1999 2000 2001 2002 2003 2004 All 1990–2026

Fitment tables

3 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Suzuki Carry X (DA62)

2001 – 2005 Japan market 1 trim

Carry 660 (LE-DA62T)

48 hp · K6A I3 145x R12 80N 2 fitments

GenerationX (DA62) 2001–2005

Power48 hp

EngineK6A I3, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12 80N	12x4 ET45 ~~4x100~~	26	Tires Rims
155/70 R13 75S	13x4.5 ET45 ~~4x100~~	29	Tires Rims

Suzuki Carry X (DA/DB52)

1999 – 2001 Japan market 2 trims

Carry 660 (GD-DA52T)

50 hp · F6A I3 145x R12 80N 2 fitments

GenerationX (DA/DB52) 1999–2001

Power50 hp

EngineF6A I3, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12 80N	12x4 ET45 ~~4x100~~	26	Tires Rims
155/70 R13 75S	13x4.5 ET45 ~~4x100~~	29	Tires Rims

Carry 660 (GD-DB52T)

50 hp · F6A I3 145x R12 80N 2 fitments

GenerationX (DA/DB52) 1999–2001

Power50 hp

EngineF6A I3, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12 80N	12x4 ET45 ~~4x100~~	26	Tires Rims
155/70 R13 75S	13x4.5 ET45 ~~4x100~~	29	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.