2022 Suzuki Carry tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Suzuki Carry.

2022 Suzuki Carry tire sizes

155/70R13 165/80R13

Bolt patterns

N/A

XI (DC61T/DN61T)

4x100

XI (DA16)

2 generations were sold in 2022. Check your chassis code before ordering wheels.

Other years

2018 2019 2020 2021 2022 2023 2024 2025 All 1990–2026

Fitment tables

3 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Suzuki Carry XI (DC61T/DN61T)

2019 – 2027 1 trim

Carry 1.5i

95 hp · 1.5L K15B I4 165/80 R13 1 fitment

GenerationXI (DC61T/DN61T) 2019–2027

MarketLatin America

Power95 hp

Engine1.5L K15B I4, Petrol

Center boreN/A

PCDN/A

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/80 R13	~~unknown~~	–	Tires

Suzuki Carry XI (DA16)

2013 – 2025 Japan market 2 trims

Carry 660i (3BD-DA16T)

46 hp · 0.66L R06A I3 145x R12 80N 2 fitments

GenerationXI (DA16) 2013–2025

MarketJapan

Power46 hp

Engine0.66L R06A I3, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12 80N	12x3.5 ET45 ~~4x100~~	2.4	Tires Rims
155/70 R13 75Q	13x4 ET45 ~~4x100~~	2.4	Tires Rims

Carry 660i (3BD-DA16T)

50 hp · 0.66L R06A I3 145x R12 80N 2 fitments

GenerationXI (DA16) 2013–2025

MarketJapan

Power50 hp

Engine0.66L R06A I3, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12 80N	12x3.5 ET45 ~~4x100~~	2.4	Tires Rims
155/70 R13 75Q	13x4 ET45 ~~4x100~~	2.4	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.