Skip to content

2016 Suzuki Celerio tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Suzuki Celerio.

Bolt pattern
Fitment tables

2 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Suzuki Celerio II

2014 – 2021 2 trims

Celerio 0.8D

46 hp · 0.8L E08A I2 165/65 R14 79S 6 fitments
GenerationII 2014–2021
Power46 hp
Engine0.8L E08A I2, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79S14x5 ET45 4x10032TiresRims
175/60 R14 79T14x5 ET45 4x10032TiresRims
185/60 R14 82T14x5.5 ET45 4x10032TiresRims
165/60 R15 81T15x5 ET45 4x10032TiresRims
175/55 R15 77T15x5.5 ET45 4x10032TiresRims
185/55 R15 82T15x5.5 ET45 4x10032TiresRims

Celerio 1.0i

67 hp · 1.0L K10B I3 165/65 R14 79S 6 fitments
GenerationII 2014–2021
Power67 hp
Engine1.0L K10B I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79S14x5 ET45 4x10032TiresRims
175/60 R14 79T14x5 ET45 4x10032TiresRims
185/60 R14 82T14x5.5 ET45 4x10032TiresRims
165/60 R15 81T15x5 ET45 4x10032TiresRims
175/55 R15 77T15x5.5 ET45 4x10032TiresRims
185/55 R15 82T15x5.5 ET45 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.