1998 Suzuki Cultus Wagon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Suzuki Cultus Wagon.

1998 Suzuki Cultus Wagon tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2002 Japan market 3 trims

95 hp · G15A I4 175/70 R13 82S 2 fitments

GenerationGD/GC 1998–2002

Power95 hp

EngineG15A I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET45 ~~4x100~~	29	Tires Rims
185/60 R14 82H	14x5.5 ET45 ~~4x100~~	29	Tires Rims

114 hp · G16A I4 185/60 R14 82H 2 fitments

GenerationGD/GC 1998–2002

Power114 hp

EngineG16A I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R14 82H	14x5.5 ET45 ~~4x100~~	29	Tires Rims
195/50 R15 81V	15x6 ET45 ~~4x100~~	30	Tires Rims

133 hp · J18A I4 195/55 R15 84V 2 fitments

GenerationGD/GC 1998–2002

Power133 hp

EngineJ18A I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/55 R15 84V	15x5.5 ET45 ~~4x100~~	30	Tires Rims
205/45 R16 83V	16x6.5 ET45 ~~4x100~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.