2000 Suzuki Esteem tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Suzuki Esteem.

2000 Suzuki Esteem tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1999 – 2002 USA market 2 trims

95 hp · I4 175/70 SR13 2 fitments

GenerationI 1999–2002

Power95 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 SR13	13x5 ET45 ~~4x100~~	29	Tires Rims
185/60 HR14	14x5.5 ET45 ~~4x100~~	29	Tires Rims

122 hp · I4 185/60 HR14 2 fitments

GenerationI 1999–2002

Power122 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 HR14	14x5.5 ET45 ~~4x100~~	29	Tires Rims
195/50 VR15	15x6 ET45 ~~4x100~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.