Skip to content

1998 Suzuki Jimny Wide tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Suzuki Jimny Wide.

1998 Suzuki Jimny Wide tire sizes

Bolt pattern
Fitment tables

1 trim sold in 1998

Open a trim for its factory package and every alternative size, front and rear.

Suzuki Jimny Wide JB33

1998 – 2000 Japan market 1 trim

Jimny Wide 1.3i (GF-JB33W)

84 hp · G13B I4 205/70 R15 95Q 2 fitments
GenerationJB33 1998–2000
Power84 hp
EngineG13B I4, Petrol
Center bore108.1 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 R15 95Q15x5.5 ET5 5x139.72.2TiresRims
205/65 R16 93S16x6 ET0 5x139.72.2TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.