2013 Suzuki Jimny tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Suzuki Jimny.

2013 Suzuki Jimny tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2023 3 trims

84 hp · 1.3L M13A I4 195/80 R15 96S 4 fitments

GenerationIII (JB23) 1998–2023

MarketEurope

Power84 hp

Engine1.3L M13A I4, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/80 R15 96S	15x5.5 ET5 ~~5x139.7~~	26	Tires Rims
175/80 R16 91S	16x5.5 ET22 ~~5x139.7~~	1.8	Tires Rims
195/75 R16 91S	16x5.5 ET5 ~~5x139.7~~	26	Tires Rims
205/70 R16 91S	16x6 ET0 ~~5x139.7~~	26	Tires Rims

84 hp · 1.3L M13A I4 205/70 R15 95Q 6 fitments

GenerationIII (JB23) 1998–2023

MarketLatin America

Power84 hp

Engine1.3L M13A I4, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15 95Q	15x5.5 ET5 ~~5x139.7~~	2.2	Tires Rims
215/75 R15	15x5.5 ET5 ~~5x139.7~~	2.2	Tires Rims
195/80 R15 96S	15x5.5 ET5 ~~5x139.7~~	26	Tires Rims
175/80 R16 91S	16x5.5 ET22 ~~5x139.7~~	1.8	Tires Rims
195/75 R16 91S	16x5.5 ET5 ~~5x139.7~~	26	Tires Rims
205/70 R16 91S	16x6 ET0 ~~5x139.7~~	26	Tires Rims

63 hp · 0.66L K6A I3 195/80 R15 96Q 4 fitments

GenerationIII (JB23) 1998–2023

MarketJapan

Power63 hp

Engine0.66L K6A I3, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/80 R15 96Q	15x5.5 ET22 ~~5x139.7~~	26	Tires Rims
175/80 R16 91Q	16x5.5 ET22 ~~5x139.7~~	1.8	Tires Rims
195/75 R16 91S	16x5.5 ET5 ~~5x139.7~~	26	Tires Rims
205/70 R16 91S	16x6 ET0 ~~5x139.7~~	26	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.