Skip to content

2020 Suzuki Jimny tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Suzuki Jimny.

Bolt pattern

2 generations were sold in 2020. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Suzuki Jimny IV (JB64)

2018 – 2027 2 trims

Jimny 1.5i

101 hp · 1.5L K15B I4 195/80 R15 96S 4 fitments
GenerationIV (JB64) 2018–2027
MarketEurope
Power101 hp
Engine1.5L K15B I4, Petrol
Center bore108.1 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/80 R15 96S15x5.5 ET5 5x139.71.8TiresRims
175/80 R16 91S16x5.5 ET22 5x139.71.8TiresRims
195/75 R16 91S16x5.5 ET5 5x139.726TiresRims
205/70 R16 91S16x6 ET0 5x139.726TiresRims

Jimny 660T (3BA-JB64W)

63 hp · 0.6L R06A I3 195/80 R15 96S 4 fitments
GenerationIV (JB64) 2018–2027
MarketJapan
Power63 hp
Engine0.6L R06A I3, Petrol
Center bore108.1 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/80 R15 96S15x5.5 ET5 5x139.726TiresRims
175/80 R16 91S16x5.5 ET22 5x139.71.8TiresRims
195/75 R16 91S16x5.5 ET5 5x139.726TiresRims
205/70 R16 91S16x6 ET0 5x139.726TiresRims

Suzuki Jimny III (JB23)

1998 – 2023 1 trim

Jimny 1.3i

84 hp · 1.3L M13A I4 205/70 R15 95Q 6 fitments
GenerationIII (JB23) 1998–2023
MarketLatin America
Power84 hp
Engine1.3L M13A I4, Petrol
Center bore108.1 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 R15 95Q15x5.5 ET5 5x139.72.2TiresRims
215/75 R1515x5.5 ET5 5x139.72.2TiresRims
195/80 R15 96S15x5.5 ET5 5x139.726TiresRims
175/80 R16 91S16x5.5 ET22 5x139.71.8TiresRims
195/75 R16 91S16x5.5 ET5 5x139.726TiresRims
205/70 R16 91S16x6 ET0 5x139.726TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.