Skip to content

2013 Suzuki Kizashi tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Suzuki Kizashi.

Bolt pattern
Fitment tables

3 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Suzuki Kizashi RE/RF

2009 – 2015 3 trims

Kizashi 2.4i

176 hp · 2.4L J24B I4 215/60 R16 95V 5 fitments
GenerationRE/RF 2009–2015
MarketEurope
Power176 hp
Engine2.4L J24B I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 95V16x6.5 ET45 5x114.332TiresRims
215/55 R17 94V17x6.5 ET45 5x114.332TiresRims
225/55 R17 96V17x7 ET45 5x114.332TiresRims
235/50 R17 95V17x7.5 ET50 5x114.335TiresRims
235/45 ZR18 94W18x8 ET50 5x114.335TiresRims

Kizashi 2.4i (CBA-RE91S)

185 hp · J24B I4 235/45 ZR18 94W 3 fitments
GenerationRE/RF 2009–2015
MarketJapan
Power185 hp
EngineJ24B I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
235/45 ZR18 94W18x8 ET50 5x114.335TiresRims
215/55 R17 94H17x6.5 ET45 5x114.332TiresRims
235/40 ZR19 92W19x8 ET50 5x114.335TiresRims

Kizashi 2.4i (CBA-RF91S)

185 hp · J24B I4 235/45 ZR18 94W 3 fitments
GenerationRE/RF 2009–2015
MarketJapan
Power185 hp
EngineJ24B I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
235/45 ZR18 94W18x8 ET50 5x114.335TiresRims
215/55 R17 94H17x6.5 ET45 5x114.332TiresRims
235/40 ZR19 92W19x8 ET50 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.