2024 Suzuki Lapin tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Suzuki Lapin.

2024 Suzuki Lapin tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2020 – 2025 1 trim

51 hp · 0.66 L R06A I3 Petrol 0.66 L R06A I3 155/65 R14 4 fitments

GenerationHE33S 2020–2025

MarketJapan

Power51 hp

Engine0.66 L R06A I3 Petrol 0.66 L R06A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	155/65 R14	14x4.5 ET45 ~~4x100~~	35	Tires Rims
Alt	Front145/80 R13	13x ~~4x100~~	35	Tires Rims
	Rear145/80 R13	~~4x100~~	35	Tires
Alt	165/55 R15	15x4.5 ET45 ~~4x100~~	35	Tires Rims
Alt	165/55 R15	15x5 ET45 ~~4x100~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.