2012 Suzuki Palette tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Suzuki Palette.

2012 Suzuki Palette tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2013 Japan market 3 trims

54 hp · K6A I3 155/65 R13 73S 2 fitments

GenerationMK21 2008–2013

Power54 hp

EngineK6A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R13 73S	13x4 ET45 ~~4x100~~	29	Tires Rims
165/55 R14 72V	14x4.5 ET50 ~~4x100~~	30	Tires Rims

63 hp · K6A I3 165/55 R14 72V 2 fitments

GenerationMK21 2008–2013

Power63 hp

EngineK6A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/55 R14 72V	14x4.5 ET50 ~~4x100~~	30	Tires Rims
165/45 R15 72V	15x5 ET45 ~~4x100~~	33	Tires Rims

63 hp · K6A I3 165/55 R14 72V 2 fitments

GenerationMK21 2008–2013

Power63 hp

EngineK6A I3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/55 R14 72V	14x4.5 ET50 ~~4x100~~	30	Tires Rims
165/45 R15 72V	15x5 ET45 ~~4x100~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.