1988 Suzuki Vitara tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Suzuki Vitara.

1988 Suzuki Vitara tire sizes

205/70R16 215/65R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1998 1 trim

74 hp · G16A I4 195x SR15 3 fitments

GenerationET/TA 1988–1998

Power74 hp

EngineG16A I4, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195x SR15	15x5.5 ET25 ~~5x139.7~~	29	Tires Rims
205/70 R16 95S	16x6 ET25 ~~5x139.7~~	29	Tires Rims
215/65 R16 97S	16x6 ET20 ~~5x139.7~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.