Skip to content

1996 Suzuki X-90 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Suzuki X-90.

1996 Suzuki X-90 tire sizes

Bolt pattern
Fitment tables

1 trim sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

Suzuki X-90 LB

1995 – 1998 Japan market 1 trim

X-90 1.6i (E-LB11S)

99 hp · G16A I4 195/65 R15 91S 2 fitments
GenerationLB 1995–1998
Power99 hp
EngineG16A I4, Petrol
Center bore108.1 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x5.5 ET10 5x139.729TiresRims
205/60 R16 92S16x6 ET0 5x139.729TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.