Skip to content

2005 Suzuki XL-7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Suzuki XL-7.

2005 Suzuki XL-7 tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Suzuki XL-7 TX92 Facelift

2004 – 2006 USA market 1 trim

XL-7 2.7i

185 hp · H27A V6 235/60 R16 100H 2 fitments
GenerationTX92 Facelift 2004–2006
Power185 hp
EngineH27A V6, Petrol
Center bore108.1 mm
PCD5x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
235/60 R16 100H16x7 ET5 5x139.726TiresRims
245/55 R17 99V17x7.5 ET0 5x139.729TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.