2026 SWM G01 Pro tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 SWM G01 Pro.

2026 SWM G01 Pro tire sizes

225/60R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2025 – 2027 1 trim

178 hp · 1.5 L JL473ZQ7 I4 Petrol 1.5 L JL473ZQ7 I4 225/60 R18 1 fitment

GenerationG01 Pro 2025–2027

MarketEurope

Power178 hp

Engine1.5 L JL473ZQ7 I4 Petrol 1.5 L JL473ZQ7 I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM14 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	225/60 R18	18x6.5 ET38 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.