2018 SWM G01F tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 SWM G01F.

2018 SWM G01F tire sizes

225/65R17 225/60R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2018 – 2027 1 trim

154 hp · 1.5 L DG15T I4 Petrol 1.5 L DG15T I4 225/60 R18 2 fitments

GenerationG01F 2018–2027

MarketChina

Power154 hp

Engine1.5 L DG15T I4 Petrol 1.5 L DG15T I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM14 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	225/60 R18	18x6.5 ET38 ~~5x114.3~~	32	Tires Rims
Alt	Front225/65 R17	17x ~~5x114.3~~	–	Tires Rims
	Rear225/65 R17	~~5x114.3~~	–	Tires

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.