Skip to content

2010 TagAZ Tager tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 TagAZ Tager.

2010 TagAZ Tager tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

TagAZ Tager Tager

2008 – 2012 Europe market 4 trims

Tager 2.3

N/A · N/A 235/75 R16 1 fitment
GenerationTager 2008–2012
PowerN/A
EngineN/A
Center bore104.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R1616x7 ET22 6x139.7–TiresRims

Tager 2.6

N/A · N/A 235/75 R16 1 fitment
GenerationTager 2008–2012
PowerN/A
EngineN/A
Center bore104.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R1616x7 ET22 6x139.7–TiresRims

Tager 2.9

N/A · N/A 235/75 R16 1 fitment
GenerationTager 2008–2012
PowerN/A
EngineN/A
Center bore104.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R1616x7 ET22 6x139.7–TiresRims

Tager 3.2

217 hp · I4 235/75 R16 2 fitments
GenerationTager 2008–2012
Power217 hp
EngineI4, Petrol
Center bore104.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R1616x7 ET20 6x139.7–TiresRims
235/70 R1616x7 ET22 6x139.7–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.