Skip to content

2026 Tank 700 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Tank 700.

2026 Tank 700 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Tank 700 700

2024 – 2027 2 trims

700 3.0T

349 hp · 3.0 L E30Z V6 Petrol 3.0 L E30Z V6 275/60 R20 2 fitments
Generation700 2024–2027
Power349 hp
Engine3.0 L E30Z V6 Petrol 3.0 L E30Z V6, Petrol
Center bore100.1 mm
PCD6x139.7
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE275/60 R2020x8 ET55 6x139.736TiresRims
OE275/50 R2222x9 ET55 6x139.736TiresRims

700 3.0T PHEV

516 hp · 3.0 L E30Z TZ290XH001 V6 Hybrid 3.0 L E30Z TZ290XH001 V6 275/60 R20 2 fitments
Generation700 2024–2027
MarketChina
Power516 hp
Engine3.0 L E30Z TZ290XH001 V6 Hybrid 3.0 L E30Z TZ290XH001 V6, Hybrid
Center bore100.1 mm
PCD6x139.7
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE275/60 R2020x8 ET55 6x139.736TiresRims
OE275/50 R2222x9 ET55 6x139.736TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.