1991 Toyota 4Runner tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Toyota 4Runner.

1991 Toyota 4Runner tire sizes

225/75R15 265/70R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1995 2 trims

116 hp · 2.4L I4 225/75 R15 3 fitments

GenerationII 1989–1995

Power116 hp

Engine2.4L I4, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 R15	15x6 ET0 ~~6x139.7~~	2	Tires Rims
31x10.50 R15	15x7 ET8 ~~6x139.7~~	2	Tires Rims
265/70 R16	16x8.5 ET0 ~~6x139.7~~	2	Tires Rims

150 hp · 3.0L V6 225/75 R15 3 fitments

GenerationII 1989–1995

Power150 hp

Engine3.0L V6, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 R15	15x6 ET0 ~~6x139.7~~	2	Tires Rims
31x10.50 R15	15x7 ET8 ~~6x139.7~~	2	Tires Rims
265/70 R16	16x8.5 ET0 ~~6x139.7~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.