Skip to content

2021 Toyota Agya tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Toyota Agya.

2021 Toyota Agya tire sizes

Bolt pattern

2 generations were sold in 2021. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Agya Facelift II

2020 – 2023 Southeast Asia market 2 trims

Agya 1.0 VVT-i

66 hp · 1.0L 1KR-VE I3 175/65 R14 82T 3 fitments
GenerationFacelift II 2020–2023
Power66 hp
Engine1.0L 1KR-VE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5 ET40 4x10036TiresRims
155/80 R13 79S13x4.5 ET45 4x10029TiresRims
175/55 R15 77T15x5 ET40 4x10036TiresRims

Agya 1.2 VVT-i

87 hp · 1.2L 3NR-VE I4 175/65 R14 82T 3 fitments
GenerationFacelift II 2020–2023
Power87 hp
Engine1.2L 3NR-VE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5 ET40 4x10036TiresRims
155/80 R13 79T13x4.5 ET45 4x10029TiresRims
185/55 R15 82H15x5.5 ET45 4x10036TiresRims

Toyota Agya Facelift I

2017 – 2023 Southeast Asia market 1 trim

Agya 1.0 VVT-i

66 hp · 1.0L 1KR-VE I3 175/65 R14 82T 3 fitments
GenerationFacelift I 2017–2023
Power66 hp
Engine1.0L 1KR-VE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5 ET40 4x10036TiresRims
155/80 R13 79S13x4.5 ET45 4x10029TiresRims
175/55 R15 77T15x5 ET40 4x10036TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.