2009 Toyota Allion tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Toyota Allion.

2009 Toyota Allion tire sizes

195/65R15 195/55R16 185/70R14 185/65R15

Bolt pattern

5x100

Other years

2005 2006 2007 2008 2009 2010 2011 2012 All 2001–2025

Fitment tables

4 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Toyota Allion II

2007 – 2010 4 trims

Allion 1.5 VVT-i (NZT260)

109 hp · I4 185/70 R14 88S 2 fitments

GenerationII 2007–2010

Power109 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x6 ET45 ~~5x100~~	–	Tires Rims
185/65 R15 88S	15x6 ET45 ~~5x100~~	33	Tires Rims

Allion 1.8 VVT-i (ZRT260)

134 hp · I4 195/65 R15 91S 2 fitments

GenerationII 2007–2010

Power134 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET45 ~~5x100~~	33	Tires Rims
195/55 R16 86V	16x6 ET45 ~~5x100~~	2	Tires Rims

Allion 1.8 VVT-i (ZRT265)

123 hp · I4 195/65 R15 91S 1 fitment

GenerationII 2007–2010

Power123 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET45 ~~5x100~~	33	Tires Rims

Allion 2.0 VVT-i (ZRT261)

156 hp · I4 195/65 R15 91S 2 fitments

GenerationII 2007–2010

Power156 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET45 ~~5x100~~	33	Tires Rims
195/55 R16 86V	16x6 ET45 ~~5x100~~	2	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.