1998 Toyota Altezza tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Toyota Altezza.

1998 Toyota Altezza tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2005 2 trims

158 hp · I6 195/65 R15 91H 2 fitments

GenerationAltezza 1998–2005

Power158 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91H	15x6.5 ET50 ~~5x114.3~~	–	Tires Rims
215/45 ZR17	17x7 ET50 ~~5x114.3~~	–	Tires Rims

207 hp · I4 195/65 R15 91H 3 fitments

GenerationAltezza 1998–2005

Power207 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91H	15x6.5 ET50 ~~5x114.3~~	–	Tires Rims
205/55 R16 89V	16x6.5 ET50 ~~5x114.3~~	–	Tires Rims
215/45 ZR17	17x7 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.