2012 Toyota Aqua tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Toyota Aqua.

2012 Toyota Aqua tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2014 Japan market 1 trim

72 hp · 1NZ-FXE I4 165/70 R14 81S 5 fitments

GenerationAqua 2011–2014

Power72 hp

Engine1NZ-FXE I4, Hybrid

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R14 81S	14x5 ET39 ~~4x100~~	2.4	Tires Rims
175/65 R15 84H	15x5 ET39 ~~4x100~~	2.2	Tires Rims
195/50 R16 84V	16x6 ET51 ~~4x100~~	2	Tires Rims
175/60 R16 82H	16x6 ET45 ~~4x100~~	33	Tires Rims
195/45 R17 81W	17x6.5 ET41 ~~4x100~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.