Skip to content

2011 Toyota Avanza tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Toyota Avanza.

2011 Toyota Avanza tire sizes

Bolt pattern

2 generations were sold in 2011. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Avanza II

2011 – 2015 2 trims

Avanza 1.3 VVT-i

91 hp · 1.3L I4 185/70 R14 88S 3 fitments
GenerationII 2011–2015
Power91 hp
Engine1.3L I4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88S14x5 ET45 4x114.333TiresRims
195/60 R15 89T15x6 ET38 4x114.333TiresRims
205/50 R16 88H16x6.5 ET35 4x114.332TiresRims

Avanza 1.5 VVT-i

107 hp · 1.5L I4 185/70 R14 88S 3 fitments
GenerationII 2011–2015
Power107 hp
Engine1.5L I4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88S14x5 ET45 4x114.333TiresRims
195/60 R15 89T15x6 ET38 4x114.333TiresRims
205/50 R16 88H16x6.5 ET35 4x114.332TiresRims

Toyota Avanza I

2003 – 2011 2 trims

Avanza 1.3 VVT-i

91 hp · 1.3L K3-VE I4 185/70 R14 88T 2 fitments
GenerationI 2003–2011
Power91 hp
Engine1.3L K3-VE I4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88T14x5 ET42 4x114.3–TiresRims
185/65 R15 88H15x5.5 ET42 4x114.3–TiresRims

Avanza 1.5 VVT-i

107 hp · 1.5L 3SZ-VE I4 185/65 R15 88H 2 fitments
GenerationI 2003–2011
Power107 hp
Engine1.5L 3SZ-VE I4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88H15x5.5 ET42 4x114.3–TiresRims
185/70 R14 88T14x5 ET42 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.