Skip to content

1994 Toyota Caldina tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Toyota Caldina.

1994 Toyota Caldina tire sizes

Bolt patterns
Fitment tables

8 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear.

Toyota Caldina I

1992 – 2002 8 trims

Caldina 1.5i (R-ET196V)

99 hp · 5E-FE I4 155x R13 2 fitments
GenerationI 1992–2002
Power99 hp
Engine5E-FE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x R13 4x100–Tires
165x R13 4x100–Tires

Caldina 1.5i (T-ET196V)

99 hp · 5E-FE I4 155x R13 2 fitments
GenerationI 1992–2002
Power99 hp
Engine5E-FE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x R13 4x100–Tires
165x R13 4x100–Tires

Caldina 1.8i (E-ST190G)

123 hp · 4S-FE I4 175/70 R14 84S 2 fitments
GenerationI 1992–2002
Power123 hp
Engine4S-FE I4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84S14x5.5 ET45 5x100–TiresRims
185/65 R14 86S14x5.5 ET45 5x100–TiresRims

Caldina 2.0 D (S-CT196V)

73 hp · 2C I4 155x R13 2 fitments
GenerationI 1992–2002
Power73 hp
Engine2C I4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x R13 4x100–Tires
165x R13 4x100–Tires

Caldina 2.0 D (S-CT198V)

73 hp · 2C I4 165x R13 1 fitment
GenerationI 1992–2002
Power73 hp
Engine2C I4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x R13 4x100–Tires

Caldina 2.0 D (X-CT190G)

72 hp · 2C I4 175/70 R14 84S 2 fitments
GenerationI 1992–2002
Power72 hp
Engine2C I4, Diesel
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84S14x5.5 ET45 5x100–TiresRims
185/65 R14 86S14x5.5 ET45 5x100–TiresRims

Caldina 2.0i (E-ST191G)

138 hp · 3S-FE I4 185/65 R14 86S 1 fitment
GenerationI 1992–2002
Power138 hp
Engine3S-FE I4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 86S14x6 ET45 5x100–TiresRims

Caldina 2.0i (E-ST195G)

133 hp · 3S-FE I4 185/65 R14 86S 1 fitment
GenerationI 1992–2002
Power133 hp
Engine3S-FE I4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 86S14x6 ET45 5x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.