2004 Toyota Caldina tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Toyota Caldina.

2004 Toyota Caldina tire sizes

215/45R17 195/65R15

Bolt pattern

5x100

Other years

2000 2001 2002 2003 2004 2005 2006 2007 All 1992–2007

Fitment tables

4 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Toyota Caldina III

2002 – 2007 4 trims

Caldina 1.8 VVT-i (ZZT241W)

130 hp · I4 195/65 R15 91S 2 fitments

GenerationIII 2002–2007

Power130 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET45 ~~5x100~~	–	Tires Rims
215/45 ZR17	17x7 ET45 ~~5x100~~	–	Tires Rims

Caldina 2.0 Turbo (ST246W)

256 hp · I4 215/45 ZR17 1 fitment

GenerationIII 2002–2007

Power256 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/45 ZR17	17x7 ET45 ~~5x100~~	–	Tires Rims

Caldina 2.0 VVT-i (AZT241W)

150 hp · I4 195/65 R15 91S 2 fitments

GenerationIII 2002–2007

Power150 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET45 ~~5x100~~	–	Tires Rims
215/45 ZR17	17x7 ET45 ~~5x100~~	–	Tires Rims

Caldina 2.0 VVT-i (AZT246W)

148 hp · I4 195/65 R15 91S 2 fitments

GenerationIII 2002–2007

Power148 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET45 ~~5x100~~	–	Tires Rims
215/45 ZR17	17x7 ET45 ~~5x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.