1986 Toyota Celica tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Toyota Celica.

1986 Toyota Celica tire sizes

Bolt patterns

IV (T160)

IV (T160)

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1985 – 1989 2 trims

135 hp · 2.0L 3S-GELC I4 205/60 R14 88V 6 fitments

GenerationIV (T160) 1985–1989

Power135 hp

Engine2.0L 3S-GELC I4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R14 88V	14x6 ET39 ~~5x100~~	30	Tires Rims
185/75 R13	13x6 ET40 ~~5x100~~	30	Tires Rims
185/70 R14	14x6 ET40 ~~5x100~~	30	Tires Rims
195/60 R15	15x6.5 ET40 ~~5x100~~	30	Tires Rims
205/55 R15	15x6.5 ET40 ~~5x100~~	30	Tires Rims
205/50 R16	16x6.5 ET40 ~~5x100~~	30	Tires Rims

N/A · N/A 185/75 R13 5 fitments

GenerationIV (T160) 1985–1989

PowerN/A

EngineN/A

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/75 R13	13x6 ET40 ~~4x100~~	–	Tires Rims
185/70 R14	14x6 ET40 ~~4x100~~	–	Tires Rims
195/60 R15	15x6.5 ET40 ~~4x100~~	–	Tires Rims
205/55 R15	15x6.5 ET40 ~~4x100~~	–	Tires Rims
205/50 R16	16x6.5 ET40 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.