Skip to content

1998 Toyota Celica tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Toyota Celica.

Bolt pattern
Fitment tables

5 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear.

Toyota Celica VI (T200)

1993 – 1999 5 trims

Celica 2.0 GT (ST205)

252 hp · I4 215/50 R16 90V 1 fitment
GenerationVI (T200) 1993–1999
MarketJapan
Power252 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/50 R16 90V16x7.5 ET45 5x100–TiresRims

Celica 2.0 VVT-i (ST202)

197 hp · I4 205/55 R15 87V 1 fitment
GenerationVI (T200) 1993–1999
MarketJapan
Power197 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R15 87V15x7 ET45 5x100–TiresRims

Celica 2.0 VVT-i (ST202C)

197 hp · I4 205/55 R15 87V 1 fitment
GenerationVI (T200) 1993–1999
MarketJapan
Power197 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R15 87V15x7 ET45 5x100–TiresRims

Celica 2.0i (ST202)

138 hp · I4 195/65 R14 89S 2 fitments
GenerationVI (T200) 1993–1999
MarketJapan
Power138 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R14 89S14x6 ET45 5x100–TiresRims
205/55 R15 87V15x6.5 ET45 5x100–TiresRims

Celica 2.2

135 hp · I4 205/55 R15 5 fitments
GenerationVI (T200) 1993–1999
MarketUSA
Power135 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R1515x6.5 ET40 5x100–TiresRims
185/75 R1313x6 ET40 5x100–TiresRims
185/70 R1414x6 ET40 5x100–TiresRims
195/60 R1515x6.5 ET40 5x100–TiresRims
205/50 R1616x6.5 ET40 5x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.